How to clean greasy floor: step by step for each type

The way to clean greasy floors varies for each type of floor. Passing a broom and a damp cloth is almost universal, but some care is needed not to damage the floor. To produce a solution it is necessary to use the appropriate material, some of them are: vinegar, alcohol, detergent, bicarbonate and coconut detergent.

Your floor is very dirty and you don’t know what else to do? Mr. Cleaning Services has sorted out tips on how to clean grimy floors so you can get rid of that annoying dirt for good.

After all, there’s nothing better than coming home and finding everything clean, glowing with that little smell of cleanliness. However, even maintaining a daily cleaning routine, it is common to find stains arising from one’s everyday life.

Arriving with the dirty foot of the street, dropping certain substances, accumulation of fat … the list is endless. The floor is one of the most affected areas and can beat that despair: how to clean dirty floors?

Importance of Cleaning the Floor Properly

Your floor may be clean, but it doesn’t look clean. This situation is very common when it’s grimy. But the importance of solving this problem is not only aesthetic.

A well maintained floor is the guarantee that your porcelain, club or any other material that searches your floor is long-lasting, that the finish remains in perfect condition and that it doesn’t need to be changed so early.

It is common for century-old houses to attract attention for their well cared for floors. It is worth remembering that several domestic employees dedicated themselves to this daily, time that is no longer common nowadays. So, check out practical tips that will facilitate this care in your home!

What is the best product to clean dirty floors?

If you’re reading our article, you’re probably having this doubt. Did we get it right? Home products offer a good cost x benefit. We are talking about: detergent, vinegar, bicarbonate, alcohol, among others. So read on and find out some homemade tips to get rid of that headache by using these items.

How do you clean a greasy floor with bicarbonate?

As an alternative to traditional cleaning products, baking soda has plenty of potential to leave your dirty floor shining again. Learn this tip and test it in your home!

Then, mix the baking soda with some hydrogen peroxide. Leave it to act for a few minutes and rub the dirt with a soft brush or clean microfiber cloth. Then, just remove the excess. And don’t forget to test it first on a small area of your floor, eh?!

How to remove stains from the floor?

Stains on the floor always leave a bad appearance. But rest assured, we brought a tip that solves most cases, using only 2 ingredients: salt and lemon.

Squeeze the lemon over the floor until it covers the stain completely. Then spread some salt on it. Let the 2 products act for a few minutes. Now, with a soft brush or a sponge, rub the place gently. To finish, pass a dry cloth and remove the excess.

Recipe for miraculous grimy floor cleaner

If you were looking for a miracle recipe to do the best dirty floor cleaning, you just found it! Oh, and don’t worry! All the ingredients are probably already in your house. Let’s go to the list of necessary materials:

  • 1 grater;
  • 1 basin;
  • 1 liter of hot water;
  • Soap shavings;
  • 200 ml of softener;
  • 100 ml of alcohol;
  • 200 ml of vinegar.


Take the soaps, preferably the old ones, that you don’t use anymore, and pass in the grater. Put the shavings inside the basin and pour hot water until they dissolve. Add the other ingredients and mix well until it is homogeneous. If the floor cleaner has become too concentrated, complete it with water. Store in a plastic bottle to use it whenever necessary!

To use the product, dilute 2 measures of it in a bucket with water. Moisten a clean cloth in the mixture, apply it over the floor, making gentle movements and spreading the mixture. To finish, remove the excess.

How to clean a greasy floor with bicarbonate and vinegar?

Do you know the dynamic duo of vinegar and bicarbonate? These 2 products together have an enormous cleaning potential! And when we talk about greasy floor cleaning it couldn’t be any different. So, look, how to make this little homemade mix:

You’re gonna need it:

  • 1 plastic pot;
  • 400 ml of water;
  • 5 tablespoons of neutral detergent;
  • 100 ml of vinegar;
  • 50 ml of alcohol;
  • 2 spoons of sodium bicarbonate;
  • 1 tablespoon of salt.


Put all the ingredients in the plastic jar and mix until a very homogeneous mixture is formed. Apply on the floor, testing in a small area before, and let it act for a few minutes.

Rub the product with a soft microfiber cloth all over the floor, making smooth movements. To finish, rinse and remove the excess mixture.

Tips on how to clean grubby floors of different types

Each floor requires a different type of cleaning. Passing a broom and a damp cloth is almost universal, but some care is needed to not spoil a certain type of floor and maintain its beauty, without putting a damp cloth on it.

Some people have the habit of mixing the cleaning products, such as chlorine, sanitary water and disinfectants, and let the floor soak. This can be fatal to the floor and make it spoil more easily.

In general, always avoid very strong products and follow the instructions for use on packaging. Here’s what not to do when cleaning your floor.

Grubby Ceramic Home Cleaning Product

There are specific cleaning products to be applied on ceramics and porcelain. The tip is to read the labels and look for the one that is most suitable for your situation. This floor allows the use of specific cleaning products. In rooms such as bathrooms and kitchens, where the presence of grease is a constant, degreasing and disinfecting mixtures are ideal.

To avoid greasy floors, heavy cleaning of the floor is important. To do this, mix detergent and water and apply to the floor with a broom. It is important to rub the grout, as they are more prone to dirtying. Then remove the solution with a wet cloth and dry the floor with a damp cloth.

How to remove wood flooring

The wood brings the feeling of coziness to the house, but requires constant care and extra attention. Whether it’s bat, solid wood or parquet, none of them can have much contact with humidity, since it spoils the wood, leaving it rotten and with many stains.

Therefore, it should be cleaned more often during the week, using a hair broom, with soft bristles or a vacuum cleaner. Avoid piaçavas brooms!

After sweeping the room, wipe a damp cloth with water. Once a week you can dilute some area specific disinfectant in the water. This will allow a deeper cleaning.

In both cases, the important thing is to dry well. Therefore, use two cloths. One wet to clean and one dry to remove moisture. This is the key to cleaning and not ruining the floor!

How to clean stone damp floors

When the cladding is in stone, the surface is therefore more porous. If the stone is clear, it is much easier for it to get dull and lose all the beauty and class that this floor can give your home.

Using only water and neutral detergent, try to brush with a more rigid bristle material, this way you can remove dirt that accumulates without using aggressive products.

Marble floor cleaning product

This is generally an easy floor to clean, although it is a porous material. Strong or greasy products should be avoided, as they will keep the greasy from coming out. In fact, they can contribute to greasiness.

If you want to clean your marble, and learn how to remove the white floor in general, the ideal solution is to put a spoonful of coconut detergent in a liter of water, pass a cloth with the mixture and then another to dry.

From time to time, it is worth calling a professional company so that this care not to burn is redoubled, especially being the floor is white!

How to clean laminate flooring

Laminate flooring can be the terror for those who don’t want to see any kind of stain on the floor. Lamination makes it easier to accumulate fat and fix liquids that fall on it. This is the kind of floor that only the damp cloth will not solve.

A tip for these cases is to mix in a sprayer in equal parts vinegar, alcohol and water, adding drops of detergent. After gathering these materials, simply spray on the floor and wipe with a microfiber cloth. This cloth is ideal for its softness.

How to clean a slip-resistant, encarded floor

First, avoid using bleach to clean the non-slip floor so that it is not damaged.

Remove excess dust and thicker dirt with a broom. Now mix in a bucket with water, a little disinfectant and neutral detergent. Apply over the entire floor surface and let it act for a few minutes.

Make circular movements with a broom to remove the remaining dirt and rinse the excess mixture.

How do I get the grimy out of the bathroom floor?

To learn how to clean bathroom floors and get them clean again, you’ll need to:

  • 2 liters of water;
  • 200 ml of liquid soap or neutral detergent;
  • Essence to taste;
  • 250 ml of sanitary water.

Mix all ingredients well and apply to the bathroom floor. If necessary, also apply on tiles. Rub well with a broom and don’t forget the corners or the grooves, where you can use an old toothbrush. Wait for about 15 minutes before rinsing all the excess mixture and that’s it!

Take special care when handling bleach, which can stain clothes. Also be sure to wear gloves to avoid the strong smell this product can leave on your skin.

Professional floor cleaning

After all these tips, you already know how to clean dirty floors. However, you must have realized that it’s not easy at all and that this kind of cleaning deserves dedication.

Therefore, it is worth considering a professional cleaning from a company specialized in the service. In addition to saving your work, you save time and are sure that the result will be as expected. Mr. Cleaning Services, for example, has the ideal solution for each type of floor.

The guarantee of a better job is due to the use of innovative and specific machinery and products for each purpose. The company evaluates the situation and makes the ideal procedure in the shortest possible time.

By making the decision to hire a company, instead of risking to do it yourself in the few moments of spare time, you guarantee the hygiene of your home and are sure that the products and care applied to your floor are the best to prolong the result, without interfering in its useful life.

Contact us and learn more about the services you can purchase!